Lights

Manufactured from ABSIdeal for fitment with Off Road or Custom Bikes. Offering a clean and sporty looking Stop Light.Pyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular...

The Angle license plate light is the perfect evolution of the PLA model. The LED technology and the new arrangement of the LEDs make it possible to improve the central and side illumination of the license plate. It is compatible with all models of Puig...

Manufactured from AluminiumAluminium grill covers designed to provide superior protection for the Puig Auxiliary LightsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular...

Replacement Switch for the Puig Auxiliary Lights.

- Click here for fitting instructions This is a set of supports. Lights not included. Manufactured from Aluminium Designed to mount Puig Auxiliary Lights to your model specificallyThe supports will arrive safely packaged together with comprehensive...

- Click here for fitting instructions This is a set of supports. Lights not included. Manufactured from Aluminium Designed to mount Puig Auxiliary Lights to your model specificallyThe supports will arrive safely packaged together with comprehensive...

- Click here for fitting instructions This is a set of supports. Lights not included. Manufactured from Aluminium Designed to mount Puig Auxiliary Lights to your model specificallyThe supports will arrive safely packaged together with comprehensive...

- Click here for fitting instructions This is a set of supports. Lights not included. Manufactured from Aluminium Designed to mount Puig Auxiliary Lights to your model specificallyThe supports will arrive safely packaged together with comprehensive...

- Click here for fitting instructions LED technology with low power consumption avoiding putting the battery in danger due to excessive consumption. With instructions to mount on engine guards. Suitable for engine guards of diameter between 20.5 and 25...

- Click here for fitting instructionsThis set of clamps enables you to fit the Beam 2.0 Auxiliary Lights (Sold Separately - M20755N) to the Puig R19 frame sliders or any tube of 39mm

- Click here for fitting instructions LED technology with low power consumption avoiding putting the battery in danger due to excessive consumption. With instructions to mount on engine guards. Suitable for engine guards of diameter of 25 mm. Equipped...

Change the look of your motorcycle with the Curve Lights by Puig. A set of LED-approved turn signals with black housing and transparent glass. These front lights can operate as a day time running light and turn signal all in one compact unit. Size: 49...

Change the look of your motorcycle with the Curve Lights by Puig. A set of LED-approved turn signals with black housing and transparent glass. These rear lights can operate as a brake light day time running light and turn signal all in one compact unit...

Height: 60mm Width: 23mm Manufactured from Plastic LED Indicator with 'Stick Fit' fitmentPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and fixtures are...

LED turn signal Sequential Light Pattern Manufactured from Plastic 75mm X 33.6mm Puig Lights and Indicators have been specially selected for their universality and compatibility with most motorcycles.All regular fittings and fixtures are supplied with...

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

Before mounting the turn signals you should take into account their placement. If the stock wiring does not have the necessary length to reach the signals you will need an extension that matches the original terminals of your custom.

- Click here for fitting instructionsIt should be noted that most motorcycles use bimetallic relays so their frequency depends directly on the amperage that circulates through the circuit. When replacing them this amperage varies and therefore the...

- Click here for fitting instructionsSupport for mounting aftermarket indicators. Made from steel with epoxy painted finish.

Support for mounting aftermarket indicators. Made from steel with epoxy painted finish.

Support for mounting aftermarket indicators. Made from steel with epoxy painted finish.

Support for mounting aftermarket indicators. Made from steel with epoxy painted finish.

Support for mounting aftermarket indicators. Made from steel with epoxy painted finish.

- Click here for fitting instructionsIt should be noted that most motorcycles use bimetallic relays so their frequency depends directly on the amperage that circulates through the circuit. When replacing them this amperage varies and therefore the...

- Click here for fitting instructionsIt should be noted that most motorcycles use bimetallic relays so their frequency depends directly on the amperage that circulates through the circuit. When replacing them this amperage varies and therefore the...

- Click here for fitting instructionsIt should be noted that most motorcycles use bimetallic relays so their frequency depends directly on the amperage that circulates through the circuit. When replacing them this amperage varies and therefore the...

It should be noted that most motorcycles use bimetallic relays so their frequency depends directly on the amperage that circulates through the circuit. When replacing them this amperage varies and therefore the frequency of the blinking also. Identify...

- Click here for fitting instructions 11W High Beam 9W Low Beam and 4W DRL EC Approved for road use 175mm Total Diameter 160.4mm Depth Powder Coated Metal Body A round headlight with LED's for superior brightness and efficiency. A great addition to a...

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Before mounting the Puig license plate light you must take into account its placement. If the original wiring is not long enough you can purchase this adaptor cable to avoid cutting of the original installation.

Manufactured from Aluminium and GlassIdeal for use in conjunction with the Pyramid 'Mantis Fly Screen'H1 55w-12v high beam. 50mm Diameter. 80mm Length.Puig Lights and Indicators have been specially selected for their universality and compatability with...

Manufactured from Aluminium and GlassIdeal for use in conjunction with the Pyramid 'Mantis Fly Screen'H3 55w-12v high beam. 75mm Diameter. 130mm Length.Puig Lights and Indicators have been specially selected for their universality and compatability with...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...

Manufactured from Steel and Epoxy CoatedPerfect for those that want to mount their original indicatorsPyramid Lights and Indicators have been specially selected for their universality and compatability with most motorcycles. All regular fittings and...