DENALI Light Kit & CANsmart Bundle For KTM 790 Adventure/R '19-

(No reviews yet) Write a Review
£539.85 - £881.85

DENALI Light Kit & CANsmart Bundle For KTM 790 Adventure/R '19-

What is the Bundle? (click on each product for more info)

-DENALI 2.0 CANsmart Controller - KTM 790, 1090, 1190 & 1290 Adventure Series

-DENALI Driving Light Mounts For KTM 790 Adventure / R '19

& Choice Of Auxiliary Light

-DENALI S4 2.0 TriOptic LED Light Kit With DataDim Technology

-DENALI 2.0 D4 Trioptic LED Aux Light Kit with DataDim Technology

-DENALI 2.0 D7 Trioptic LED Aux Light Kit with DataDim Technology

Harness the flexibility and intelligence of your KTM motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the KTM controls or the CANsmart™ Accessory Manager Software.

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light. 


  • High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
  • ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
  • Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
  • Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
  • Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
  • Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during road side emergency's. 
  • Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
  • Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
  • Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
  • Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
  • Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions.
  • Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
  • Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
  • On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

Whats In The Box?

CANsmart™ Controller
(x2) 5.5ft Light Extension Cables
5ft SoundBomb Horn Extension Cable
B6 Brake Light Wiring Adapter
Adhesive Hook-and-Loop Fastener
Micro USB Programming Cable

(2x) LED Light Pods 
(2x) True-Hybrid Lenses (Installed) 
(2x) E Mark Approved Spot Lenses (included) 
(1x) HotSwap Single Intensity Wiring Harness 
(1x) DrySeal Waterproof Illuminated Switch  
(1x) 7/8" inch Handlebar Switch Mount 
(1x) 1-inch Handlebar Switch Mount 
(2x) Hinge Mounts with M8 Stainless Steel Hardware
(4x) Zip Ties & (1x) Adhesive Mounting Square

The DENALI 2.0 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for power sports applications, Denali focused on generating the most amount of light with the least amount of power draw from your vehicle.


Customers Also Viewed